ADS200 AccuDrive Soldering Station with TD-200, ISB Cubby & 3 Tip Bundle (230V Only)
PACE’s ADS200 is a high power (up to 120 Watts), yet low-cost professional soldering station for serious cell-phone repairers, electronics techs, engineers, DIYers & production solder techs. It features the groundbreaking TD-200 Tip-Heater Cartridge Soldering Iron, with its sleek and ergonomic aluminum handle designed to stay cool and comfortable during continuous production soldering. Blue Series Tip-Heater Cartridges integrate a high accuracy sensor with a robust heater, delivering up to 120 Watts of pure power. Three of PACE's most popular Tip Heater Cartridges are included. The bundle also include the Instant SetBack Cubby (ISB) automatically lowers the temperature when the TD-200 is placed in the stand. This will greatly increase tip life as well as save energy.
At the heart of the ADS200 lies PACE’s new AccuDrive® temperature control technology, which delivers unsurpassed thermal performance and highly accurate temperatures, without the need to change tip cartridges or calibrate. Its advanced electronics provide instantaneous load sensing and on-demand power to quickly reflow solder joints at the lowest, safest temperature required, regardless of the mass of the application. Intended for extreme, multi-shift production use, the ADS200 features a rugged, all-metal design, including housing, soldering iron and tool stand. The system is intuitive and easy to operate – just power it on, set the temperature with arrow keys and start soldering. No training required.
- SpecificationsDimensions104mm (4.1") H x 130mm (5.1") W x 152mm (6") DWeight2.3kg (5 lbs)RoHS CompliantYesControl TechnologyAccuDrive®Tip-to-Ground Resistance2 Ohms or lessMeets or Exceeds ANSI/J-STD-001YesTested using ANSI/ESD S13.1-2015Yes. Tested up to 50MHz using S13.1-2015 Method. Meets or Exceeds J-STD-001 and ESD S20.20 RequirementsMeets or Exceeds ANSI/ESD S20.20YesTemperature AccuracyMeets or Exceeds ANSI/J-STD-001 RequirementsTemperature Range193-454°C (380-850°F)Tip CompatibilityUses AccuDrive™ Blue Series Tip-Heater CartridgesSoldering IronTD-200 AccuDrive Tip-Heater Cartridge Soldering IronTool StandInstant-Setback Cubby. Can hold up to 7 tips, comes standard with sponge, stay moist well and brass wool to clean oxidation from tip
Premium Quality, High-Powered Soldering Station at a Competitive Price
PACE's ADS200 Station features an intuitive interface with digital display and soft buttons,
just push the arrow keys up or down to change temperature from 380-850°F (193-454°C)
Introducing the NEW Cool Touch™ TD-200 Tip-Heater Cartridge Iron
Beneath its sleek dimensions, comfortable ergonomics and cool touch, the TD-200 makes continuous production soldering effortless. With an ultra-short tip-to-grip (1.9"/48mm) and comfortable ergonomic design, the TD-200 dramatically reduces grip stress and operator fatigue, while delivering precision operator dexterity, especially when used under a magnifier or microscope. The TD-200's aluminum Cool Touch™ handle stays cool and comfortable even during extended production use. And with PACE's new AccuDrive heating technology, this iron provides accurate tip temperatures, heat-up/recovery, and high-capacity heating - all at safe low temperatures.
The TD-200 is capable of delivering instant heat-up & recovery, whether it's a delicate
micro-soldering application (0201's), or high thermal mass application (D-Paks).
Instant SetBack Cubby (ISB)
New Tip and Tool Stand for the TD-200 and TD-100A handpieces. The Instant SetBack Cubby (ISB) automatically lowers the temperature when the TD-200 is placed in the stand. This will greatly increase tip life as well as save energy. The Tool Stand features a new wide-angled mouth that allows the operator to easily insert and remove their soldering iron while still being able to hold it securely. Each Tip and Tool Stand allows for safe and secure holding of either handpiece, hot tips, Tip Tool, Water Sponge, Cleaning Brush and can be mounted to the side of of the PACE power source. The unit incorporates a low abrasive dry wipe made of fine metal coil that won't drop tip temperature, cleans better than conventional sponges, won't damage your tips, and allows for removal of caked on/burned-on lead-free fluxes and oxides. The Sponge/Water Well is still included, but not really necessary! Each Tip and Tool Stand is constructed with heavy duty, corrosion resistant metal.
AccuDrive® Blue Series Tip-Heater Cartridges
Inexpensive Cartridges Superior Heat Transfer/Delivery Less than half the price of most cartridge style or curie point tips,
delivers lowest cost of ownership.
Allows for safer, lower temperatures, reduces risk of PCB damage and improves tip life. One Tip Geometry, Any Temperature Hot-Swappable Quick-Change Tips Unlike with curie point tips, select any temperature for a chosen tip
cartridge without having to buy additional ones.
Fast & easy change-out within 2 seconds, without turning the unit off. Accurate, Honest Temperatures Fast Initial Heat-Up Consistent, accurate tip temperatures meet or exceed J-STD-001 requirements. Achieves set temperatures in seconds. High Capacity Integrated Heater Wide Variety of Tip Geometries Available Delivers up to 120 Watts of pure power
For the most delicate of micro-soldering to challenging, high thermal mass applications
글 작성시 설정한 비밀번호를 입력해 주세요.확인
상품이 장바구니에 담겼습니다.